Image
ImageImageImageImageImageImageImage
 
Image
   
Image

TASK-LINE® DESIGN

Through a proprietary process, FDA-approved, pure virgin PTFE resin is compression molded around and through a heavy-gage, 304 stainless steel, perforated, metal insert. After oven sintering, the porous-free PTFE resin 100% encapsulates the stainless insert, isolating it from and fluid contact while in service.

NO MORE FABRICATION OR GASKETS

TASK-LINE® pipeline fluid blockers (line blockers) are molded to size, 1” through 6” (other sizes available upon request) in class 150# ANSI dimensions with a nominal thickness of 1/8”.Installation and removal are a snap with its integral molded paddle handle. The handle extends 2” above the flange and has a pre-drilled 3/8” hole for tagging (while in service) or hanging (while in storage). The handle can be factory painted for identification purposes. TASK-LINE® line blockers self-align and seat easily to any 150# ANSI flange and never require gaskets.Q

 

TASK-LINE© BENEFITS

In terms of performance and longevity TASK-LINE® PIPELINE FLUID BLOCKERS SET THE STANDARD. Line blockers have a temperature range from cryogenic to +400°F and are chemically resistant to: all acids, all chlorides, all sulfates, all bleach solutions, all solvents, all phenols, all caustics, and all peroxides. TASK-LINE® pipeline fluid blockers are leak-free and bubble-tight and can be used over and over without sacrificing sealing ability. And, TASK-LINE® line blockers have zero corrosion rates which contribute to lower life=cycle costs when compared to fabricated of competitive alloy paddles.

TASK-LINE© PERFORMANCE

When installed between two flanges, TASK-LINE® line blockers block out all pipeline fluid. The PTFE-encapsulated metal insert reduces any radial flow which eliminates bolt retorquing after installation, maintaining a bubble-tight seal. The strength of metal insert also provides critical, blowout-proof protection, another benefit of  TASK-LINE® line blockers is the PTFE’s non-stick property which allows it to easily release from flanges during disassembly without any scraping.

 

Image
Image
SIZE (IN)
PART NUMBER
(150# FLANGE)
OD

1/2 TLB0050 1.875
3/4 TLB0075 2.250
1 TLB0100 2.625
1-1/2 TLB0150 3.375
2 TLB0200 4.125
3 TLB0300 5.375
4 TLB0400 6.875
6 TLB0600 8.750
Image
ImageOther sizes available upon request.

 

 

 

Copyright© 2005 PureFlex, Inc. All rights reserved.