TASK-LINE® DESIGN
Through a proprietary process, FDA-approved, pure virgin PTFE resin is compression molded around and through a 304 stainless steel, perforated metal insert. After oven sintering, every gasket undergoes a 15,000-volt spark test to check for pinholes. The porous-free PTFE resin 100% encapsulates the stainless insert, isolating it from any fluid contact while in service.
NO MORE FABRICATION;
EASY INSTALLATION
TASK-LINE® gaskets are molded to size, 1/2'” through 24” in class 150# and 300# ANSI ratings with a thickness of 1/8” or 3/32” (other thicknesses available upon request). Installation is quick and simple. TASK-LINE® gaskets are self-aligning and seat easily to any flange in almost any condition.
TASK-LINE® gaskets have a temperature range of cryogenic to 400°F (consult factory for higher temperatures) and are chemically resistant to: all acids, all chlorides all sulfates all bleach solutions, all solvents, all phenols, all caustics, and all peroxides. TASK-LINE® gaskets are leak-free and bubble-tight and can be used over and over without sacrificing sealing ability. TASK-LINE® gaskets have zero corrosion rates which contribute to lower life-cycle costs when compared to envelope or solid gasket types.
TASK-LINE® PERFORMANCE
In terms of performance and longevity, nothing comes close. When installed between two flanges, the PTFE-encapsulated metal insert restricts the PTFE from cold flow/creep while under load. The metal insert prevents radial flow of the gasket which eliminates bolt retorquing after installation, maintaining a tight seal even through repeated temperature cycles, The strength of the metal insert also provides critical, blowout-proof protection, another benefit of TASK-LINE® gaskets is the PTFE’s non-stick property which allows it to easily release from flanges during disassembly without any scraping..
